Equipment
Usage makes equipment less reliable and older machines simply cannot effectively hold our tight tolerances weather it’s lathes,mills,or robotics. Therefore, no piece of CNC equipment 7 years old or older is process critical. Chandler now has over 80 CNC machines installed and operating with over 120 full time employees. See the listing below. |
|
CNC EQUIPMENT – Montevideo, MN |
| |
|
| 4 |
Mazak QT. 15 lathes, Mazak T-32 controls,
15 H.P., 20 inches between centers, 8 inch chuck, 12 tool stations. |
| 9 |
Mazak QT. 20 lathes, Mazak T-Plus controls,
20 H.P., 20 inches between centers, 8-inch chuck, 12 tool stations. |
| 6 |
Mazak QT. 200 Nexus lathes, Mazak 640T controls,
15 H.P., 8 inch chuck, 12 tool stations, with bar feeders. |
| 2 |
Mazak QT. 250 lathe, Mazak 670T control,
20 H.P. 8 inch chuck, 12 tool stations, with bar feeders. |
| 1 |
Mazak QT. 28 lathe, Mazak T-2 control,
30 H.P., 36 inches between centers, 10-inch chuck, 12 tool stations. |
| 1 |
Mazak QT. 8 lathe, Mazak T-2 controls,
10 H.P., 16 inches between centers, 6 inch chuck, and 12 tool stations. |
| 1 |
Mori Seiki SL35, Fanuc control,
40 H.P., 36 inches between centers, 15 inch chuck, 16 tool stations, 21 inch maximum turning diameter. |
| 1 |
Mazak Dual Turn, 20 control,
20 H.P., 20 inches between centers, 8 inch chuck, 2-12 position turrets, automated unload, with bar feed. |
| 6 |
Mazak SQT 200 and 250M; 12 position turrets with live tooling. |
| 1 |
Mazak QT NEXUS-100; Mazak Control; 12 position. |
| 1 |
Mazak Multiplex 6200; two 12 positions turrets, with bar feeder; full automation, live milling and tooling. |
| 1 |
Mazak QY200 8 inch chuck, 12 station turret, 640T control |
| 1 |
Methods 25 Swiss Type, 5/8" maximum diameter, with live tooling. |
| 1 |
Citizen Cincom M20 Swiss type, 7/8" maximum diameter, with live tooling and bar feeders. |
| 1 |
Tsugami Swiss BS20, 5/8" maximum diameter, with live tooling and bar feeder. |
| 1 |
Mori Seiki NL2000, Fanuc Control, 12 position turrets with live tooling. |
| |
|
| saws |
| 1 |
Amada HA250-5HZ |
| 1 |
Amada HFA-250W |
| 1 |
DoAll C12A6A |
| 1 |
Behringer HBP-430A |
|
| Mills |
| 2 |
Takisawa MAC-V1 drilling centers, Fanuc OM controls,
10 H.P., 24" X 17" table, 40 taper tooling, and 10 tool stations. |
| 2 |
Kitamura MY Center Zero, Yasnac controls,
15 H.P., 20" X 18" table, 30 taper tooling, and 16 tool stations. |
| 2 |
Brother TC 227's, Brother controls, 7 H.P., 20" X 18" table, 30 taper tooling, 10 tool stations. |
| 1 |
Brother TC 229N, Brother controls; 10 H.P. |
| 2 |
Brother TC 32A with rotary tables, 11 H.P., 16,000 RPM, 18 tools |
| 6 |
Brother TC 31A's and 32A’s with Rotary tables, 11 H.P., 16,000 RPM, 27 tools. |
| 2 |
Fanuc Robo Drill, 10-station turret, high-speed, and drilling and tapping machines. |
| 1 |
Haas VF-3 VMC's, Haas controls, 15 H.P., 36" X 18" table, 24 tool stations. |
| 1 |
Haas VF-2 VMC's, Haas controls, 24 tool stations |
| 2 |
Mori Seiki MV40 B's, Fanuc MF-M7 controls,
15 H.P. 30" X 24" table, 40 taper tooling, and 30 tool stations. |
| 1 |
Mori Seiki M300A1's with pallets, Fanuc MF-M4 controls,
20 H.P., full 4th axis, coolant thru system, 40 taper tooling, and 30 tool stations, 10,000 RPM. |
| 2 |
Mori Seiki SV-50's, MSC 518 Fanuc controls,
15 H.P., 36" X 24" table, 40 taper tooling, 30 tool stations, 10,000 RPM. |
| 1 |
Mori Seiki SH50 Horizontal, Fanuc MSC-516 control,
40 H.P., 40 taper tooling, 40 tool stations with pallets, 10,000 RPM. |
| 1 |
Mazak FH5800, Horizontal, Mazak Control,
40 H.P, 40 taper tooling, 60 tool stations with pallets. 12,000 RPM with high pressure coolant. |
| 4 |
Mori Seiki NH5000, Horizontal Machining Center, Fanuc controls,
40 H.P, 60 tool stations, 15,000 RPM with high pressure coolant. |
| 1 |
Mori Seiki SH40 Horizontal, MSC-518 Fanuc control,
30 H.P., 40 taper tooling, 40 tool stations with pallets, 10,000 RPM. |
| 1 |
Mazak VMC 20/40B. |
| 1 |
Kitamura Mycenter 2XI. |
| 2 |
Mazak HCN 5000, Mazak control, 40 taper, 15,000 RPM with high pressure coolant |
| 28 |
HT 160 Hass Indexers. |
| |
|
|
| 3 |
Current EDM Drill CT300, with conversational Siemens CNC controls. |
| |
 |
| Robotics |
| 1 |
Fanuc Robot R-2000 iA with vision. |
| 2 |
Fanuc Robot LR Mate 200 iB with pallet loaders. |
| |
|
| Major Inspection Equipment |
| 4 |
Gage Master 14” Optical Comparators.
2 Quadra Check 200
1 with edge finder |
| 2 |
Numerex Coordinate Measuring Machines. |
| 6 |
Mitutoyo Profilometer |
| |
|
| Engineering Systems (Compatibility) |
|
Autocad 14 with Pro-E Compatibility |
|
Edgeware Cam systems all facilities |
| |
|
CNC EQUIPMENT – Minneapolis, MN |
|
| Mills |
| 1 |
Brother TC-32A. |
| 1 |
Brother TC-31A. |
| |
|
| Turning Centers
|
| 1 |
Hitachi Seiki HT 20S11. |
| 1 |
Mazak QT-N 20UNIV |
| 1 |
Nexus 100 QTN100 |
| |
|
|
|
|
|
